The LOMAX Professional Series makes a bold statement with its revolutionary, low profile design and superior protection. This diamond plate tonneau cover provides a weathertight seal, simple installation and easy one person operation. To prevent elements from entering the truck box, the LOMAX Folding Tonneau Cover features aluminum panels with a water shedding design and water resistant hinges. Additional extruded aluminum channels increase the strength of each panel, making the hard tri-fold cover stronger with minimum added weight. The water resistant hinges, flexible rubber seals and limited metal-on-metal contact all work together to reduce noise and vibration for a quiet ride. Committed to quality and durability, the LOMAX Professional Series is redefining rugged.
FEATURES
- SLEEK, ULTRA LOW PROFILE DESIGN: Sits less than a half inch above the truck box, the classic diamond plate finish of the LOMAX Professional Series Cover adds a striking appearance to your truck.
- EASY TO OPERATE: To open, pull release latch from either side and fold each panel to automatically disengage additional locks. Next, fasten with integrated storage clips. To close, unfasten storage clips and unfold panels using built-in handles. When closed, cover locks automatically at ten points, keeping cargo safe and out of sight.
- WEATHERTIGHT SEAL: The water shedding design and waterproof hinges direct water away from the pickup box, no gutters or drains needed. The aluminum tri-fold tonneau overlaps the box rails with a continuous seal down the full length of the side rails, preventing elements from entering the pickup box.
- STRONG YET LIGHTWEIGHT: The LOMAX Professional Series features additional aluminum channels under each panel. Extruded aluminum channels reinforce the panels to support up to 500 pounds of evenly dispersed weight, while weighing approximately 60 pounds for a high strength-to-weight ratio.
- INTEGRATED STORAGE CLIPS: Retractable storage clips secure the truck bed cover and vinyl capped, rigid standoffs keep panels appropriately spaced in the folded position. No adjustments required.
- Use eight TIGHT BITEClamps to install rails. Engage hooks by sliding truck cover forward and lowering into retainment brackets. Unfolding panels lock tonneau cover automatically at ten points when closed. No drilling necessary.
- EASY TO REMOVE AND REINSTALL: With tonneau cover open and storage clips secured, pull latches on front panel and disengage hooks by sliding cover back; lift to remove. Reinstall by sliding cover forward to engage hooks, then lower to automatically lock in retainment brackets.
With a low profile you crave and the security you require, the LOMAX(TM) Professional Series is reinventing how a hard cover should be. From easy operation to the water shedding design, the cutting-edge performance of LOMAX(TM) Professional Series prevails. A classic diamond plate finish and additional extruded aluminum channels deliver extra strength to an already tough hard folding cover. Looks good and works hard, the LOMAX(TM) Professional Series is ready for anything.
With a low profile you crave and the security you require, the LOMAX(TM) Professional Series is reinventing how a hard cover should be. From easy operation to the water shedding design, the cutting-edge performance of LOMAX(TM) Professional Series prevails. A classic diamond plate finish and additional extruded aluminum channels deliver extra strength to an already tough hard folding cover. Looks good and works hard, the LOMAX(TM) Professional Series is ready for anything.
02-08 Dodge Ram 1500 6' 4 Box; 09-18 Ram 1500 6' 4 Box; 19-21 Ram 1500 Classic 6' 4 Box; 03-09 Dodge Ram 2500, 3500 6' 4 Box; 10-18 Ram 2500, 3500 6' 4 Box
Access LOMAX Professional Series Tri-Fold Cover 02-19 Dodge/Ram 2500/3500 6ft 4in Bed (w/o Rambox)
Ram 1500 6ft. 4in. Box/19 Classic (w/o RamBox Cargo Mgt System)
Professional Hard Cover - Silver
LOMAX Professional S
PROFESSIONAL SERIES
1500 6ft. 4in. Box
Tonneau Cover
Agri-Cover manufactures two types of roll up tonneau covers and a new Tri-fold tonneau cover. Our Access roll up covers & truck tonneau covers give you additional protected storage, while the low profile roll up covers give you a sleek, low profile look. ACI's inventive truck tonneau covers and truck accessories emphasize style, durability, quality, value and functionality. The Lomax Roll Up covers & truck tonneau covers distance themselves from other truck bed covers with superior workmanship, easy installation and simple operation. Agri-Cover's new LOMAX line maximizes your truck with a low profile tri-folding design with maximum protection. The LOMAX Hard Tri-Fold Cover maximizes your truck with a low profile design and maximum protection. This lightweight hard truck bed cover is designed for strength, security and style, while being easy to use and offering a simple one person installation and removal. This hard folding cover uses strong aluminum panels with durable, watertight, reinforced vinyl coated hinges. The panels are made from aluminum alloy used to make commercial trailers and coated with a textured matte black finish to perfectly complement your truck and OEM bed caps. Extruded aluminum channels under the panels keep the hard truck bed cover rigid while reducing weight. Flexible rubber seals, vinyl coated hinges and limited metal-on-metal contact all work together to reduce noise and vibration for a quiet ride.
Agri-cover is an innovator in the world of truck tonneau covers. Based from North Dakota their roots began in the big rig industry making covers for trailers carrying agricultural products. Their incredible fabric design was a great match for the light duty pickup market for covering valuable cargo and stand up to the elements and stresses that come with the life of a pickup. They have expanded their offerings into bed accessories, snow plows, as well as atv and utv markets. If you need a truck bed cover, they are your solution.
Agri-Cover, Inc, (ACI) manufactures Lomax Roll-Up Truck Bed Tonneau Covers and truck accessory products. Since the introduction of the Original Lomax Roll-Up Tonneau Cover in 1991, ACI has led the industry with additional inventive truck bed covers and truck accessories that emphasize style, durability, quality, value and functionality. The Lomax Tonneau Covers distance themselves from other truck bed covers with superior workmanship, easy installation and simple operation. Lomax Roll-Up Covers fit your lifestyle, your truck and your budget!
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
