Type-OE Carbon Fiber Hood for 2018 Dodge Demon
Reducing weight from any late model muscle car usually focuses on the doors. Anderson Composites has successfully met that demand by offering carbon fiber Challenger doors in two versions. The vacuum infused process (VIP) or dry carbon fiber reduces the OE door weight by at least 30+ lbs. per door. In addition to these items, a dry carbon fiber decklid and roof are also available for even more weight reduction. The dry carbon fiber utilizes pre-impregnated resin in the fabric, which reduces the amount of resin needed to make the component. The part is then placed in an autoclave where extreme pressure and high temperature cure the component thus making it lighter and more durable. The dry carbon fiber component retains a matte finish. The carbon fiber doors, decklid and roof fit in the factory locations with the OE hardware (where applicable) for the best fit and finish.
Anderson Composites is excited to introduce new carbon fiber hoods, front chin splitter, grille, fenders/flares, rocker panels, rear valance and unique rear spoiler to the Dodge product line. ?We?re expanding our Dodge products to meet the growing requests from our end users and we?re seeing huge interest within the Hellcat community?, states Zach Bohn, Brand Manager. The Demon OE hood, doors and decklid will be available with vacuum infused process (VIP) or dry carbon fiber for more weight reduction. Carbon fiber widebody components offer more options to owners who may want certain trim pieces to complement the factory body colors. The widebody rear valance accommodates the factory backup sensors and wiring harness and requires no drilling. All of these body components will fit to the factory locations with OE hardware.
All VIP carbon fiber parts are made of high quality 3k, 2x2 carbon fiber twill fabric and high-grade marine resin with UV inhibitors. The vacuum infusion process provides the best fabric-to-resin ratio which results with the best fitment and finish. These carbon fiber products have great show quality looks with a high-luster finish.
- WET Carbon Fiber - This product is manufactured Wet using 3K, 2×2 Twill Weave Carbon Fiber and Anderson Composites proprietary vacuum infusion process. The industry calls this process Wet because the resin is introduced into the mold as a liquid; this process produces a high gloss, wet-look shiny finish. It is highly recommended to use an automotive clear with UV inhibitors to prolong the life and finish of the product.
- Fiberglass skeleton bonded to underside of carbon fiber hood for strength and support
- Mounts with OE hardware
- Requires hood pins for safety reasons
- Do not install gas hood shocks, dampers, or struts
- Heat shield required
2008-2018 Dodge Challenger Features:
- Doors in lightweight VIP (AC-DD0910DGCH) weigh approximately 20 lbs. each or dry carbon fiber (AC-DD0910DGCH-DRY)
- weigh approximately 12 lbs. each (for off-highway/racing use only)
- Replacement dry carbon fiber roof (AC-CR0910DGCH-DRY) weighs approximately 9.9 lbs., the factory roof weighs 24 lbs.
- Dry carbon fiber decklid (AC-TL0910DGCH-DRY) weighs approximately 11.7 lbs. the factory decklid weighs 35 lbs.
- Carbon fiber tail light surround for 2015-2018 Challenger (AC-TLS15DGCH) fits in factory location
- Carbon fiber front grille (AC-FG15DGCH) accommodates factory headlight assembly
2018 Dodge Demon/Hellcat Widebody Features:
- Demon OE-style hood in VIP (AC-HD18DGCHDM-OE) weighs approximately 27.5 lbs. and dry carbon fiber
- (AC-HD18DGCHDM-DRY) weighs approximately 20 lbs. and mounts in factory locations with OE hardware
- Carbon fiber front chin splitter (AC-FL18DGCHHC) mounts in factory location
- Carbon fiber widebody front fenders (AC-FF18DGCHHC) and flares (AC-FLR18DGCHHC-F) combined, weigh
- approximately 9.4 lbs.
- Carbon fiber widebody rocker panels (pair) (AC-SS18DGCHHC) and flare extensions (AC-FBC18DGCHHC) will fit
- with factory chin splitter and rear valance
- Carbon fiber rear fender flares (AC-FLR18DGCHHC-R) mount to factory locations
- Carbon fiber widebody rear valance (AC-RL18DGCHHC) allows use of factory rear sensors and harness
- Newly designed, carbon fiber rear spoiler (AC-RS18DGCH) mounts to factory locations with OE hardware
Type-OE Carbon Fiber Hood for 2018 Dodge Demon
- Functional air scoop works with Demon Air-Grabber intake system
- Fits 2008-18 Challenger and 2015-18 Hellcat
- 2008-14 Challenger requires windshield washer modification
- Mounts with OE hardware, hinges and latch
- Hoods are hand crafted and weigh approximately 27.5 lbs. (stock hood weighs 30 lbs.)
- Small imperfections such as wavy weaves are inevitable due to the size and shape of the hood scoop.
- Requires hood pins for safety reasons
- Heat shield required
- Anderson Composites does not suggest re-installing gas shocks/dampers/struts
- The use of a hood prop rod is highly recommended
Type-OE carbon fiber hood for 2018 Dodge Challenger Demon
Anderson Composites components are carefully hand-crafted using only the finest materials. Our production team offers superior craftsmanship and latest production techniques for the best product quality and fitment.
Fitment: 2018 Dodge Challenger Demon
DETAILS:
- All items are made to order and may require extra time to be manufactured. Hood pins required. Heatshield required. Do not use stock shocks and dampers.
- Hood
- Hood
- Durable and lightweight
- Reuses OEM type fasteners
- Show-ready, high luster finish
- Anderson Composites hood
- carbon fiber hood; hood; fiberglass hood
- Hood
- Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the drivers presence. Buyer must retain all cartons, packing materials, and damaged products for the carriers damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyers right to make a damage claim may be denied. A signed receipt without any notation indemnified the carrier as well as Anderson Composites from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.
Anderson Composites specializes in fiberglass and carbon fiber components for late-model domestic makes and models. The company manufactures custom carbon fiber auto parts for each of their products with the utmost attention to detail; they use top-grade materials for a quality product you can trust. Extensive manufacturing experience allows AC to construct everything from hoods, trunk lids, spoilers, side rockers, lip kits, to more complex pieces like doors in both fiberglass and carbon fiber.
IMPORTANT DELIVERY INSTRUCTIONS: PLEASE INSPECT ALL TRUCK FREIGHT SHIPPED ITEMS OUT OF THE BOX BEFORE SIGNING FOR THE DELIVERY. If parts arrive damaged or missing, please do not SIGN for delivery and REFUSE the package. If the driver will not let you refuse it without signing for it then sign "DAMAGED" or "PARTS MISSING". If the parts are refused and not damaged or missing, the customer will be responsible for shipping. If the driver refuses to let you inspect the delivery please accept the package and sign "DRIVER DID NOT LET ME INSPECT PARTS".
IMAGES: Images may be a representation and may not reflect the actual product.
Items sold by Anderson Composites may not be legal for street use in all states. It is the buyerfs responsibility to comply with applicable state laws. Buyer understands that due to strict U.S. Federal and State safety crash guidelines, Anderson Composites is not responsible or liable for any damages or possible injuries incurred upon possible accidents due to driver error, incorrect installations, bad judgment, or act of nature/God, Allah, Jehovah, etc. All products are intended for off-highway uses only, and should be used for their intended purposes only. Anderson Composites does not take responsibility over buyer installation, modification, and unusual stress of the products. The buyer assumes all responsibilities for determining the suitability of the products. Anderson Composites is not responsible for any damages incurred either directly or indirectly on the vehicles or operators/passengers within the vehicles.
Customers in countries/regions outside of the USA should purchase Anderson Composites products from the Authorized Distributors in that region. Purchases made through non-official channels do not qualify for warranties.
Installation
All products require professional installation. Buyer understands that some products may require modifications for correct fitment. Minor adjustments may be necessary as part of the normal installation process. All carbon fiber products will not sustain heavy force or weight, for they could be cracked by such force or weight. Anderson Composites has made an effort to produce all its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There are absolutely no returns on painted products.
Hood Pins
All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins.
Heat Shields:
Anderson Composites requires the use of heat shields for all carbon fiber and fiberglass hoods. Heat shields help avoid pre-mature aging of the product.
Anderson Composites 6-Month Appearance Guarantee
The following situations are fully covered under the Anderson Composites 6-Month Appearance Guarantee: (Note that all Anderson Composites carbon fiber and fiberglass products are hand-made, and small imperfections are inevitable. Claims guilty of abusing Anderson Composites claims program will be denied immediately)
Heavy cloudiness under the clear finish (which is only visible under the sun. Anderson Composites apologizes for not being able to QC every product under natural sun light)
Clear finish bubble larger than 3/8 in diameter
Anderson Composites 6-Month Clear Finish Guarantee
The following situations are fully covered under the Anderson Composites 6-Month Clear Finish Guarantee: Clear finish changes color more than a full shade within 6 months (Note: like car paint, slight fading and discoloration is natural. The warranty only covers more extreme cases.)
Hood Pins: All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins.
Defective Products
All products require professional installation. Minor adjustments might be necessary. These are normal body work and installation steps. Therefore it is NOT considered to be defective. In addition, most carbon fiber products are hand-crafted, and no two items will be identical. Small imperfections such as wavy weaves, small bubbles, and clear finish blemishes are inevitable. Pictures are required to demonstrate true defects on products prior to return. See below for information on our return policy.
Shipping Damage
Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driverfs presence. Buyer must retain all cartons, packing materials, and damaged products for the carrierfs damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyerfs right to make a damage claim may be denied. A signed receipt without any notation indemnified the carrier as well as Anderson Composites from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.
All damages must be notified to carrier and the dealer within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. Anderson Composites, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Starting at 0% Order Now, Pay Later Learn More.
