QTP Jeep Grand Cherokee Trackhawk Screamer Aggressor QTEC Electronic Cutouts 527112

QTP Dodge Durango SRT8 Screamer Aggressor QTEC Electronic Cutouts, QTP Jeep Grand Cherokee SRT8 Screamer Aggressor QTEC Electronic Cutouts, QTP Jeep Grand Cherokee Trackhawk Screamer Aggressor QTEC Electronic Cutouts

QTP 2018+ Jeep Grand Cherokee Trackhawk 2.75in 304SS Aggressor Cutout Dual Mid Pipes. The Aggressor is an electric cutout pipe kit that is vehicle specific. We designed each application for the best clearance, sound and power. There's no need to figure out your install location, all of the guess work has been done for you. Most kits eliminate the need for any welding at all. Go from factory quiet to Aggressor riot! Simply bolt in and unleash hell. All systems are stainless steel and proudly made in the USA.

• Aggressor Cutout Pipe Kit
• QTEC electronic cutout valves
• Wiring harnesses
• Dual position momentary switch
• Hardware & Gaskets
• Instruction sheet

The Aggressor is an electric cutout pipe kit that is vehicle specific. We designed each application for the best clearance, sound and power. There's no need to figure out your install location. All of the guess work has been done for you. Most kits eliminate the need for any welding at all. You can go from factory quiet to aggressor riot! All systems are stainless steel for clean look and proudly made in the USA! No Custom Fabrication required and utilizing the factory hanger locations. The Aggressor gives you the TOTAL control you desire. With over 17 years experience and pioneers in the electronic exhaust market, QTP delivers the quality that you expect. These systems are proudly made in New Jersey, U.S.A.

Key Features

• Electronic dual mode exhaust system
• Total user control over power & sound
• No Custom Fabrication
• Quiet to riot with the flip of the switch
• Made in the U.S.A.

Unleash The Power!: No need to crawl under your car or truck ever again to uncork your exhaust. No need to run a loud muffler all the time to get the maximum horsepower for your ride. With the Quick Time Electric Cutout(QTEC) you can have the best of both worlds.

Quiet For The Street, Riot For The Strip!!: Go from stealth quiet to wide open power and experience the gains even if you are already enjoying an aftermarket exhaust system. You control the volume, you control the power. Open your exhaust with the flip of a switch. Run it closed, run it all the way open or any position in between. Adjust your back pressure to save gas. Does not matter whether you call it a electric exhaust cutout, exhaust dump or e-cutout you know your getting the ultimate exhaust upgrade for your car or truck.

More Size Options than any other Cutout on the Market!: Our kits are available for any application from old school muscle to high tech imports. Sizes range from 2.25, 2.5, 3, 3.5 and 4 inch our popular Low-Profile Oval Cutout kits and our Boss 302 kits. If your tight on space? No problem the Low Profile kits are totally customizable as they do not require the standard round Y-pipes. Instead we ship you our polished, connection tubes in the kit from there you cut the pipe to the length and angle that's just right for YOUR specific vehicle.

Full Metal Jacket Protection: QTP has taken our proven QTEC to the next level. After 2 years in R&D we are proud to offer on our electric exhaust cutouts with a new cast aluminum motor cover. Starting with CAD, we designed a cover for the electric motor. Cast with 360 grade aluminum, then CNC machined on the interior for a precision fit. We didn't stop there, we took it one step further using our powder coated finishing process to protect it and keep your electric cutouts looking better than ever! Whether your application is Street or Strip, Hot Rods to the Family SUV the Motor Cover provides your ride with Full Metal Jacket Protection. Another Industry First!

QTEC Construction:

• CNC 6061 Aircraft Aluminum Body
• Cast Aluminum Motor Cover
• Stainless Steel Butterfly Plate
• Stainless Steel Shaft
• 6061 Aircraft Aluminum Motor Plate
• High Torque DC Gear Driven Motor
• Gears Made from High Temp teel
• 2 position Momentary Toggle Switch
• Weather proof wiring harnesses
• Weather tight Connectors
• Proudly made in the USA

Optional QTP QTEC Wireless Remote Controller Add the QTP Wireless Remote control (10900) to control your QTP QTEC Electronic Valves. Connect your power/ground and plug in your QTEC's. Press and hold the button on the remote switch, open them wide open, or just a touch. The choice is yours! Easy to use push button operation for partial or wide open settings. You retain control of the amount of sound!

QTP 3in Bolt-On QTEC Adjustable Turn Down. Our universal turn down uses a 360 degree floating flange so you can angle the turn down in any direction you want. These are designed to bolt to any 2.5 inch 3-bolt flange or behind your QTP electric exhaust cutout. They are manufactured from polished stainless steel for good looks and long life.

***IMPORTANT STOCK NOTE: Stock status applies to just this part number and not the optional part number add-on's that you can select above . To check the stock status these optional part numbers please refer to their individual product pages.

Fits

• Fits 2012-2021 Jeep Grand Cherokee SRT 6.4L
• Fits 2018-2021 Jeep Grand Cherokee Trackhawk 6.2L
• Fits 2018-2021 Dodge Durango Durango SRT 6.4L
• Will work not with aftermarket exhausts
• No Welding Required
• Cut and clamp design
• Total user control over power and sound
• 304 stainless steel construction
• Quiet to riot with the flip of the switch
• Made in the U.S.A.

Quick Time Performance (QTP) is a leading manufacturer of high performance racing parts and accessories. Designed, developed, and manufactured by racers and gear-heads like you, QTP exhaust products are tested, track-proven, and guaranteed to enhance performance. Quick Time Performance cutouts, down-pipes, exhaust systems; enhance performance, reduce back-pressure, and increase power. QTP’s two-piece cam covers are designed to give you more flexibility in the shop or pits, and its engine lift plates will make working on your GM LSX motor easier. QTP continues to develop new and innovative racing parts and accessories.

The Quick Time Performance family of brands offers a variety of exhaust solutions for your vehicle ranging from basic cutout kits to Screamer cat back systems. All of which are designed to deliver the sound and power that you crave. Whether it's a full electronic exhaust systems or racing application. QTP delivers on performance and puts you, the driver in total control. All QTP systems are made using computer controlled manufacturing processes, using the highest quality materials available, and assembled proudly in the U.S.A.

A question worth considering Is what is your ultimate goal when deciding on an aftermarket performance exhaust for your vehicle? Are you aiming to create a quicker, more efficient path from which your car’s exhaust gases can escape allowing your car’s engine to “breathe” more efficiently the result of which is spent fuel and air exiting the combustion chambers faster and more power?

Is your goal one of creating a more aggressive yet subtle exhaust note resulting in a system that is only minimally louder yet has a deepening to low “growl” during acceleration? Or perhaps you are in search of something more for your racing machine, something allowing for better results on the track along with a superior, show stopping sound.

Whatever the reason, take a look at the high-performance exhaust systems designed and manufactured by Quick Time Performance, one of the foremost manufacturers and designers of performance exhaust products. Quick Time’s goal is creating premier high-performance racing parts and accessories that are bench tested and also carefully tested on the track so as to assure you of enhanced performance and a top of the line product.

As a testament to the QUICK TIME PERFORMANCE ingenuity consider products like the Quick Time Electric Cutout, electronically controlled exhaust cutouts that afford you the opportunity to open them up with merely the flip of a switch. You might ask yourself how something like the Electric Cutout can benefit your vehicle and the answer is an easy one. The Quick Time Electric Cutout is designed to divert gas before it reaches your muffler system by relieving back pressure thus allowing for more power and better sound and best of all it is 100% adjustable since it has a control switch that affords you the convenience of having as much or as little sound as is your preference.

Best of all Quick Time Performance designed the Quick Time Electric Cutouts to fit almost all cars and trucks with a range in size from 2/25” through 4” and offering low profile systems for those of you who have lowered or tight fitting spaces thus allowing you the opportunity for ease of installation and greater versatility. So you can see Quick Time Performance has the customer and customer satisfaction in mind when they design their products.

In addition to the above Quick Time Performance has developed an array of other products including Screamer Exhaust Systems, Ar3 Race Mufflers, High Velocity Headers and Cut out Downpipes,designed to enhance performance and augment your car’s power. And if you want greater flexibility in the pitts consider the two piece cam covers by QuickTime or the engine lift plates that make working on your motor a breeze.

Quick Time Performance is not a company to rest on their laurels, on the contrary, they are determined to offer you the newest and best products for your racing machine and they have the expertise and determination to do just that. Peruse the Quick Time Performance products on the LMPERFORMANCE web site and find the one that is best for your needs.

IMAGES: Images may be a representation and may not reflect the actual product.